| WELD-ON TOP NON-JIC TYPE RESERVOIR | ||
 |
 |
 |
| Style 1 - No Baffle, one endcover offset |
Style 2 - No baffle, one endcover |
Style 3 - Baffle, two endcovers on alternate sides of baffle |
 |
 |
|
|
Style 4 - Baffle, for endcovers, two on each end |
Style 5 - Baffle, two endcovers, centered on baffle |
|
THE FOLLOWING INFORMATION IS REQUIRED FOR QUOTING:
( Please copy this page and return completed with data for quote to fax# 256-332-3021. )
SELECT THE APPROPRIATE STYLE #: 1 2 3 4 5 (circle one)
LENGTH (L) ___________ HEIGHT (H) _________
WIDTH (W) ___________ LEG HEIGHT _________ (½” TYP)
MOUNTING LIP _________
|
Material Thickness of End |
Typical Mounting Lip |
|
12ga or 11ga |
1” |
|
7ga |
1 ½” |
|
¼” |
1 ¾” |
|
3/8” |
2 ½” |
END COVER SIZE: 6" 10" 12" 14" (circle one)
MATERIAL THICKNESS
TOP & ENDS: 12ga 11ga 7ga 1/4" 3/8" (circle one)
SIDES & BOTTOM: 12ga 11ga 7ga 1/4" 3/8" (circle one)
Note: We recommend 7ga. or thicker on top & ends thickness when a 10" or larger endcover is required.
All material consists of pickled and oiled carbon steel, unless specified.
All reservoirs are furnished with the sight/gauge and filler breather in the standard location, unless special locations are specified.
|
SPECIAL INSTRUCTIONS: |
|
|
NOTE: Due to product improvement,
specifications and price are subject to change without notice.
* All List Prices are in US currency and all shipments are FOB from factory.
Please email saint@saint.com
with questions or comments.
Copyright © 1998-2004 Saint Machinery, Inc. All rights reserved.